Production introduction:

This machine design is half cylindrical design used to do 3d working, and another table you can do the normal engraving, cutting for nonmetal materials, like acrylic, wood, foam, pcb, etc. With two spindle equipped on machine to get wider use of the machine.

The general features of the machine are as following:

1.The machine body is strong, rigid, high precision, reliable and durable.
2.Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3.Using well-known domestic brands of water-cooled brushless spindle, low noise, strong cutting ability, to ensure the long time working.
4.Good three-axis and dust-proof structure to ensure that the machines longer service life.
5.Designer perfectly, select the best machine accessories , to minimize the failure rate preferred.
6.Breakpoint specific memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing .
7.Compatility, compatible Type3/ Artcam/ Castmate/Wentai, and so on a variety of CAD/CAM designsoftware.

Parts of the machine can do some changes as your requirement:
1. Motor (stepper or sever motor)
2. Spindle ( air-cooling or water-cooling spindle)
3. Guide rail (round guide rail or square guide rail)
4. The table of the machine (Vacuum table, T-slot table, Combination of Vacuum table & T-slot table, normal table, table moving)

3D models cnc engraver Standard accessories

DSP handle, cable, Water cooling system, Power cable, Clamp, Wrench, Bit, Collet, Other tools.

 

Application:

Except normal use of cnc woodworking machine, it is applicable on cylindrical or three-dimensional engraving on stone,wood,metal and advertising industry.

 

Parameter

Item Model DW1325
1 X,Y,Z Working   Area 1300x2500x200mm
2 Table Size 1380×3040mm
3 X,Y,Z   Traveling Positioning Accuracy ±0.05/300mm
4 X,Y,Z   Repositioning Positioning Accuracy ±0.05mm
5 Table Surface Bakelite   Vacuum Ttable (Option:T-slot table)
6 Frame Welded   strucutre
7 X, Y Structure Rack and   Pinion Drive,Hiwin Rail Linear Bearings
8 Z Structure Ball Screw,   Hiwin Rail Linear Bearings
9 Max.Power   Consumption (Without spindle) 3.0Kw
10 Max.Rapid   Travel Rate 50000mm/min
11 Max.Working   Speed 25000mm/min
12 Spindle Power Motor 3 or 4.5kw   water cooling or HSD for choice
13 Spindle Speed 0-24000RPM
14 Drive Motors Stepper   system(Option:Servo System)
15 Working   Voltage AC220V/50/60Hz,1PH   (Option: 380V 3PH)
16 Command   Language G Code
17 Operating   System DSP System (Option:   Mach3 PC Software)
18 Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X,Y Resolution <0.02mm
22 Software   Compatability Type3   software,Ucancam software(Option:Artcam software)
23 Working temperature 0ºC~45ºC

Categories: , .

Production introduction:

This machine design is half cylindrical design used to do 3d working, and another table you can do the normal engraving, cutting for nonmetal materials, like acrylic, wood, foam, pcb, etc. With two spindle equipped on machine to get wider use of the machine.

The general features of the machine are as following:

1.The machine body is strong, rigid, high precision, reliable and durable.
2.Imported high-precision ball screw gap, smooth movement, to ensure that the machine tools high-precision
3.Using well-known domestic brands of water-cooled brushless spindle, low noise, strong cutting ability, to ensure the long time working.
4.Good three-axis and dust-proof structure to ensure that the machines longer service life.
5.Designer perfectly, select the best machine accessories , to minimize the failure rate preferred.
6.Breakpoint specific memory, power outages continued carving, processing time forecast, and other functions to ensure that accidental processing .
7.Compatility, compatible Type3/ Artcam/ Castmate/Wentai, and so on a variety of CAD/CAM designsoftware.

Parts of the machine can do some changes as your requirement:
1. Motor (stepper or sever motor)
2. Spindle ( air-cooling or water-cooling spindle)
3. Guide rail (round guide rail or square guide rail)
4. The table of the machine (Vacuum table, T-slot table, Combination of Vacuum table & T-slot table, normal table, table moving)

3D models cnc engraver Standard accessories

DSP handle, cable, Water cooling system, Power cable, Clamp, Wrench, Bit, Collet, Other tools.

 

Application:

Except normal use of cnc woodworking machine, it is applicable on cylindrical or three-dimensional engraving on stone,wood,metal and advertising industry.

 

Parameter

Item Model DW1325
1 X,Y,Z Working   Area 1300x2500x200mm
2 Table Size 1380×3040mm
3 X,Y,Z   Traveling Positioning Accuracy ±0.05/300mm
4 X,Y,Z   Repositioning Positioning Accuracy ±0.05mm
5 Table Surface Bakelite   Vacuum Ttable (Option:T-slot table)
6 Frame Welded   strucutre
7 X, Y Structure Rack and   Pinion Drive,Hiwin Rail Linear Bearings
8 Z Structure Ball Screw,   Hiwin Rail Linear Bearings
9 Max.Power   Consumption (Without spindle) 3.0Kw
10 Max.Rapid   Travel Rate 50000mm/min
11 Max.Working   Speed 25000mm/min
12 Spindle Power Motor 3 or 4.5kw   water cooling or HSD for choice
13 Spindle Speed 0-24000RPM
14 Drive Motors Stepper   system(Option:Servo System)
15 Working   Voltage AC220V/50/60Hz,1PH   (Option: 380V 3PH)
16 Command   Language G Code
17 Operating   System DSP System (Option:   Mach3 PC Software)
18 Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X,Y Resolution <0.02mm
22 Software   Compatability Type3   software,Ucancam software(Option:Artcam software)
23 Working temperature 0ºC~45ºC

Il n’y pas encore d’avis.

Be the first to review “DW1325 Cylinder Engraving CNC Router machine”